5.1 Microphone for the CW9004 Transmitter
C310
Short Rigid Stem
C312
Semi-rigid Gooseneck
C313
Semi-rigid Gooseneck
C314
Semi-rigid Gooseneck
C LO C K A U D I O
P A G E 1 7
P A G E 1 6
C LO C K A U D I O
Push to Talk
In this function the switch needs to pressed and held for the microphone to be live.
1. Press the switch once the LED will flash once, then again press the switch once the LED
will flash once. Once you have performed this step the switch is set for push operation.
2. For PTT press the switch twice the LED will flash twice, then press the switch once the
LED will flash once. Wait for approximately 5 seconds and the switch function will be set
into the bases memory.
Push to Mute
In this function the microphone is live until the switch is pressed and held down.
1. Press the switch once the LED will flash once, the again press the switch once the LED
will flash once. Once you have performed this step the switch is set for push operations.
2. For PTM press the switch twice the LED will flash twice, then press the switch twice the
LED will flash twice. Wait for approximately 5 seconds and the switch function will be set
into the base memory.
Please allow time for the LED to flash between each stage of programming and also at each stage
the interval between pressing the switch should be no more than one second.
Should for any reason you wish to start over remove to the base.
5. OPTIONAL ACCESSORIES
SPECIFICATIONS
Type
Condenser (Black Electret)
Polar Pattern
Cardioid
Frequency Response
50 - 18KHz
Sensitivity
-47dB ± 3dB @ 1KHz (0dB = 1VPa)
S/N Ratio
64dB (A)
Connection
3 pin Tini-Q Female Plug
Product
Overall Length
Shaft Diameter
Head Diameter
C310
100mm (3.94”)
6mm (0.24”)
12mm (0.47”)
C312-SR
200mm (7.88”)
6mm (0.24”)
12mm (0.47”)
C313-SR
300mm (11.82”)
6mm (0.24”)
12mm (0.47”)
C314-SR
400mm (15.76”)
6mm (0.24”)
12mm (0.47”)
11745 Clockaudio R-M Manual 18/12/08 11:32 Page 17
