6
2.
Safety
IMPORTANT
: For safety reasons the completed installation should be secured to a
ceiling truss or any structure capable of taking 3Kgs (7lbs) this includes the weight of
a ceiling tile.
Replace one of the 4 enclosure lid screws with the supplied M3 eyebolt and washer.
Attach the supplied safety harness hook to the eyebolt on top of the C 303 metal
case and insert the free end of the cable through the entrance hole on the gripper.
Attach the other end of the safety cable to a fixed secure structure.
Note: There are 2 types of cable grippers that may be supplied. Both types use same
method of cable tensioning and locking. Pass the cable through the gripper as
shown below, loop the cable over a secured structure then pass the cable back
through the other hole in the gripper and slide / tension the cable through the gripper.
