CLIVET WSAN-XIN 21, Installation, Use And Maintenance Manual

Page: 7 / 56

7
Operate in compliance with safety regulations in force .
2.1 PRELIMINARY INFORMATION
Before accepting the delivery you have to check:
•
That the unit hasn’t been damaged during transport.
•
Check that the materials delivered correspond with that
indicated on the transport document comparing the data
with the identification label ‘A’ positioned on the
packaging.
In case of damage or anomaly:
•
Write down on the transport document the damage you
found and quote this sentence: "Conditional acceptance
— clear evidence of deficiencies/damages during
transport".
•
Contact supplier and the carrier by fax and registered mail
with advice of receipt.
Any disputes must be made within the 8 days following the
delivery. Complaints after this period are invalid..
2.2 DELIVERY CONTROL
2.4 HANDLING
2- RECEPTION
Observe external packing instructions .
2.3 STORING
Verify unit weight and handling equipment lifting capacity .
Use single protection devices.
A
0
?
?
?
Identify critical points during handling (disconnected routes,
flights, steps, doors).
SIZE 21 31 41 51 71
Length mm 895 895 895
Depth mm 378 378 378
Height mm 992 992 992
Operating weight kg 112 116 124
Shipping weight kg 110 114 122
1038
410
1234
170
168
1038
410
1234
175
173
2
3
4
1
Be careful not to damage the unit.
Recycle and dispose of packing material in conformity with
local regulations.
2.5 PACKING REMOVING
Before handling verify that the unit keeps its balance.
Use protection to avoid the unit damaging .