User manual
6
BLUETOOTH® PAIRING
1)
Starting up
- Please activate Bluetooth® in your phone after you have
placed your phone balanced on the stabilizer.
If the screen of your phone faces up as shown,
please adjust screw of the roller in clockwise. The
adjustment should be less than a circle. And
please make sure the screw should not be lower
than the top of the plastic cone or the stabilizer
will be damaged.
Press the power switch for 2 seconds to turn
on your stabilizer. Congratulations! You can
now use your stabilizer. If your stabilizer is
Bluetooth® version, please refer to “pairing
Bluetooth®” on next page to connect your
phone to stabilizer.
Turn the tilt knob to control angle of
your phone. Press center of tilt knob to
take photos and videos (only available
for Bluetooth® version)
There are a variety of ways to hold
the stabilizer. The shown cases are
recommended holding ways to
achieve best shooting effect when
you are walking.
Summary of Contents for TEC598
Page 11: ...User manual 10 ...
