Clinton CE-DVR042, Instruction Manual

Page: 36 / 47

*DEFAULT PORT IS 80!!
WAN (World Area Network)
1) Enter IP Gateway address to DVR TCP-IP setup.
2) User may change connection speed to 512K, to reduce image data on slower
networks. Network traffic jams, always make data transfer slow, this is
normal.
3) After DVR TCP-IP setup, install the remote viewer to computer.
*See the remote viewer page
-Port is 0080 normally, may be different, depending on network company area.
PASSWORD SETUP
a. LEVEL (Log In level ID type setup) >NONE / ADMIN / USER
*NONE: user does not need to insert password before entering MENU
b. ADMIN password > 44444 (factory default)
c. USER password > 11111 (factory default)
**NOTICE: Password must be 5 (five) characters ONLY!
36