2-3
ML892E-9
®
H. MOTOR ROTATION
Temporarily remove the "V" belt. Turn power on then move the pedal forward and note the direction
of motor pulley rotation. If incorrect, do the following:
1. Turn power off.
2. Refer to section IV-C, Hidden Parameters, and follow the instructions to change motor rotation.
The parameter is in the "**** Toggle Switches" group.
3. Install the "V" belt.
G. POWER AND CABLE CONNECTIONS
Refer to figure below and connect all cables as shown. The system can be operated from 230V,
3 phase or 230V, single phase power.
Caution: It is important that the ground wire be connected between the motor and sewing
machine to prevent a static charge buildup at the sewhead.
F. SPEED CONTROL
The Clinton model 892E is equipped with
a remote speed control. Connect treadle rod
to ball joint assembly with rod and drill/tap 2
1/4-20 holes as shown. Assemble with 1/4
screws, flat washer and split washer.
Fig.2-6
Fig. 2-7
