CLEANING GUIDELINES
WARRANTY
ADJUSTMENTS
Motor Specifications
Duff Norton Motor
(standard on all models)
The Duff Norton Motor is NOT UL listed for either the US or Canada. It IS, however, approved by the "CE" for
use in Europe.
120VAC 6 amps 8000N 1.8 min. of constant use out of every 18 min.
Push
Duty Cycle
Duff Norton Motor Power Ratings
120VAC 8 amps 8000N 1 min. of constant use out of every 9 min.
Push
Duty Cycle
SKF Motor Power Ratings
120VAC 6 amps 8000N 1.8 min. of constant use out of every 18 min.
Push
Duty Cycle
Duff Norton Motor Power Ratings
120VAC 8 amps 8000N 1 min. of constant use out of every 9 min.
Push
Duty Cycle
SKF Motor Power Ratings
Clinton uses only premium vinyl for upholstery, however, care should be taken when cleaning to ensure that
the upholstery or color is not affected by the cleaning agent. Use only mild cleaning agents on upholstery.
Clinton recommends using a 1 to 1 mix of ammonia and water or a 1 to 4 mix of bleach and water, rinse
thoroughly with clean water and pat surface dry. This is not a guarantee and does not relieve the user from
responsibility of the proper and safe use of all cleaning agents. Test on inconspicuous area prior to using any
cleaning agent on upholstery's visible surface. Certain cleaning agents can be harmful to the surface.
Clinton Industries warrants manufactured products to be free of defects in materials, workmanship or design
under normal use for three years on all mechanical products and one year on all electric equipment, from the
date of purchase. This warranty does not include damage resulting from accident, abuse or misuse, alteration,
or negligence of the product and expressly excludes normal wear of parts (including but not limited to vinyl).
Contact Clinton for full warranty details.
BACKREST
(models 81200, 81330, 81350 & 81360 only)
The backrest can be adjusted from either side of
the table using the backrest actuator
.
Rotate the
actuator towards the backrest to adjust. Always use
your hand on top of the upholstered top to move
the backrest up or down. The backrest cylinder is
pressurized in the up position only and requires
force to return it to the down position.
Power Casting Table with Laminate Leg Rest
SKF Motor
(optional on all models)
The SKF Motor IS UL/CSA listed via cURus listing. It meets all qualifications for both the US and Canada AND
60601-1 Standards at the component level.
Backrest Actuator
Backrest Cylinder
Adjusting Nuts
Backrest
Cylinder