• KEEP THE PLASTIC PACKAGING OUT OF THE REACH OF CHILDREN. CHILDREN MAY SUFFOCATE. DO NOT INSTALL
THE PRODUCT WITHIN THE REACH OF YOUNG CHILDREN.
• DO NOT EXPOSE THE PRODUCT TO DIRECT SUNLIGHT, HEAT, OR A HOT OBJECT SUCH AS A STOVE. PRODUCT
LIFESPAN MAY BE REDUCED OR A FIRE MAY RESULT.
• DO NOT INSTALL THE PRODUCT IN A VEHICLE OR A PLACE EXPOSED TO DUST, MOISTURE (WATER DRIPS, ETC.),
OIL, OR SMOKE. A FIRE OR ELECTRIC SHOCK MAY RESULT.
2
3
1
Remove Protective Film
Peel off the protective film from the front of the LCD screen. You can also remove the plastic battery-retention-tab from the remote
control at this time if desired.
ITEMS INCLUDED
• Monitor
• AC-to-DC Power Supply (5’ Cord)
• 12V DC Automobile Power Supply (5‘ Cord)
• 12V Pigtail Adapter
• Remote Control
• 5’ Composite A/V Cable (BNC/RCA to 3.5mm)
• 5’ HDMI Cable
• Tilting Stand / Wall Mount
• Installation Guide
CE-L07
USER MANUAL
v.10.29.15
*Information in this document is subject to change
MODE
TCON
VOL
VOL
MENU
SOURCE
LCD REMOTE
VIDEO
SELECT
MODE
SELECT
MENU
Attach Stand / Wall Mount
Lay the display face down on a clean, flat surface. Position
the narrow rounded end of the stand into the slot on the
back of the display. Using the included attachment screws,
screw the stand onto the display. Attach the square side of
the bracket to your mounting surface using appropriate
screws (not included).
Adjust Angle
The stand can be table mounted, or wall mounted flush.
To adjust, simply move the display to the desired
angle. The bracket has the correct tension to move by
hand without the need to tighten or loosen the nuts.
