10
www.clintdigital.com
Your DC3 / DC5 is equipped with CI (Common interface).
This means that if you insert a CAM module for reading smartcards, the box can
be used to watch PayTV. This require the correct CAM module and smartcard
ĨƌŽŵLJŽƵƌdsƉƌŽǀŝĚĞƌ͘ŽŶƚĂĐƚLJŽƵƌůŽĐĂůdsƉƌŽǀŝĚĞƌĨŽƌŵŽƌĞŝŶĨŽƌŵĂƟŽŶ
regarding CAM module and smartcard.
NOTE!
CAM module and smartcard is NOT required for using the box. CAM
ŵŽĚƵůĞĂŶĚƐŵĂƌƚĐĂƌĚŝƐĨŽƌWĂLJds͘tŝƚŚŽƵƚƚŚĞďŽdžǁŝůůƐƟůůƉƌŽǀŝĚĞĂůůƚŚĞĨƌĞĞ
available channels.
1. Open the door on the right side of the front panel on your DC3 / DC5.
2. Insert cam and make sure it is inserted correctly.
3. Insert your smartcard and make sure the chip side is inserted correctly.
(This depends on the CAM module type)
5.4 Loop Through (Antenna)
If you connect an antenna cable to the RF output on the back of the box to use
ƚŚĞůŽŽƉƚŚƌŽƵŐŚĨƵŶĐƟŽŶĨŽƌdsŽƌsZĞƚĐLJŽƵŶĞĞĚƚŽďĞĂǁĂƌĞŽĨƚŚĞƐĞƫŶŐ
”Tuner Loop through” in the Picture Menu on the box.
/ĨƚŚĞǁƌŽŶŐƐĞƫŶŐŚĂƐďĞĞŶŵĂĚĞLJŽƵŵĂLJĞdžƉĞƌŝĞŶĐĞĚŝƐƚŽƌƚĞĚƐŝŐŶĂůŽŶLJŽƵƌ
dsͬsZǁŚĞŶƚŚĞďŽdžŝƐŝŶƐƚĂŶĚďLJŵŽĚĞ͘ZĞĂĚŵŽƌĞĂďŽƵƚƚŚŝƐƐĞƫŶŐŝŶƐĞĐƟŽŶ
11.2.e further down in the manual.
Summary of Contents for DC3
Page 1: ...Brugervejledning User Manual DC3 DC5 ...
Page 51: ...User Manual DC3 DC5 ...
