1
1
2
2
3
3
4
4
5
5
6
6
1. Apply the sealing compound around the opening and ensure that the juncture
between TUISKU and the wall is insulated.
Start installing from the bottom corner as is shown in the figure (1).
• The upper edges of the lower TUISKU elements are mounted to the horizontal section of the installation
frame. Lower edges and sides are mounted to the load-bearing structures.
• The upper TUISKU elements are lifted on top of the lower TUISKU elements and then mounted from the
sides and the top into the load-bearing structure.
TUISKU is mounted on the TUISKU-AK installing frame with zinc-plated drill point screw
EJOT JT2-6-6.3x25mm.
The TUISKU elements are mounted together with zinc-plated
drill point screws EJOT JT2-6-6.3x25mm.
TUISKU surface mounting
Multielement TUISKU-AK installation frame,
for example 6-piece
A
A
SECTION A-A
B
Recommended
screw type:
EJOT JT2-6-6,3x25mm
= In vertical sections
2 screws side-by-side
and in horizontal sec-
tions 2 screws on top
of one another.
A
A
SECTION A-A
B
1
1
2
2
2
3a
3a
3b
3b
climecon.fi
© Climecon
9
