7
F
or devices that are directly controlled by the Panel to turn on/turn off, e.g. power switches,
power meter switches, valve controllers, Roller Shutter Controls, or Input and Output Switches,
please link only one layer of repeater(s).
For keypad, it is also recommended to link only one layer of repeater(s).
Multiple Repeaters
If multiple repeaters are used, please follow the guidelines below for the optimum performance:
1. When linking repeaters to form a transmission replay, it is recommended to link not more
than two layers of repeaters.
From the example below (Device to B to A to Control Panel), Repeater A, Repeater B, and
the Device all need to be learned into the Control Panel.
The Device needs to be learned into its closest repeater (Repeated B). Repeater B needs
to be learned into Repeater A. (Do not learn Repeater A into Repeater B.)
Example:
2. If a device is located between the RF coverage of multiple repeaters and the Control
Panel:
Example 1:
From the displayed diagram, the device is located between the RF coverage areas of
Repeater B and C. Users can choose to learn the device into Repeater B only, learn into
Repeater C only, or learn into both Repeaters B and C.
