1
REMOTE KEYPAD (KP-23B-EL / KP-23B-EL-F1)
Jul-5-2016
z
Identifying the Parts
1. Active LED
2. Status LED
3. Fault Display LED
4.
Arm Key
5.
Home Key
6.
Χ
Key
- Check Control Panel Status
7.
Disarm Key
- to move back one step
8. # Key
9.
¿
Key
-
Enter KP Pin Code +
¿
Key to enter Test Mode
10. Send Learning Code
- Press both # and
¿
keys together to Send Learning
Code
11. Medical Alarm (if enabled)
- press both 7 and 9 to trigger medical alarm
12. Fire Alarm (if enabled)
- press both 4 and 6 to trigger fire alarm
13. Panic Alarm (if enabled)
-press both 1 and 3 to trigger panic alarm
14. Battery Insulator
15. Mounting Holes
16. Tamper Swtich
<NOTE>
&
A short beep will sound along with key pressing to indicate that the button pressed is valid.
&
4 continuous beeps will sound indicating mistake and the user should repeat the process again.
z
LED Indicator
z
Active LED (Blue/Amber):
z
Blue LED on 5 seconds: the system is in Normal Operation Mode.
z
Blue LED flashes for 5 seconds:
low battery in Normal Operation Mode
.
z
Amber LED on: the system is in
Test Mode
.
z
Amber LED flash:
low battery in Test Mode
.
z
Status LED (Blue/Red):
z
Red LED on:
the system is in
Away Mode
z
Red LED flash: the system is in
Home Mode
.
z
Blue LED on: activation of
Disarm Mode
.
z
Blue LED flash: failure due to the following reasons:
¾
No response sent by the control panel within 4 seconds.
¾
Control Panel User PIN code was incorrect.
