Climax H&S TOOL SPEED FACER ODF100, Operating Manual

Page: 31 / 132

P/N 102615, Rev. 0 Page 13
WARNING
Always stop the machine and lock-out/tag-out the PCU before making adjustments
to controls or machine components. Failure to follow this safety precaution may
result in severe injury.
Emergency shutdown
To stop machine operation immediately, press the
EMERGENCY STOP
button on the Air
Caddy.
Before restarting the ODF Speed Facer, do the following:
1. Close the speed adjustment valve.
2. Pull the
EMERGENCY STOP
button up.
3. Press the
START
button (repeat step 1 if necessary).
2.2.2 Hydraulic motor controls
Reference the included HPU (hydraulic power unit) operating instructions for controls
information.
If the HPU is not being supplied as part of the rental or sale of this machine, read and
throughly understand the controls for the HPU being used.
2.3 D
IMENSIONS
The following figures show the machine and operating dimensions.
10
Oil reservoir sight
glass
Shows the amount of oil in the reservoir.
11 Filter
Removes foreign particulates from the air supply and protects the downstream
valves and motor.
1.Figure 2-3 shows the H&S quick disconnect. Your disconnect may look different.
T
ABLE
2-3. PCU
CONTROLS IDENTIFICATION
(C
ONTINUED
)
Number Component Function