EVAPORATIVE CM-6000A
www.climateplus.ae
Guide for installation and uninstall of side panel
1) Please open the side panel to check the parts and the technical parameters, if the parts are
incomplete or breakage, Leave it as it is and inform us or the distributor.
2) Check if the supply voltage is same as the rated one. Make the phase voltage is 220+/-V.
3) Make sure the water used for cooler is clean.
Guide for installation and uninstall of side panel
1) Pull up 2 pieces of dust screens
2) Lose 10 bolts with cross screwdriver, as Pic 1. Then pull out side panel and take it out, as Pic 2
3) Please install by contrary step as above.
Guide for add water and drain
Add water:
1. Pull out the effusion hole, as pic 3;
2. Add water
Drain:
Open the valve cover for draining, also close it clockwise after drain, as pic 4.
08
