EVAPORATIVE AIR COOLER CM-12000
www.climateplus.ae
1- Keep doors and windows open to allow fresh air to enter, and treated air to exit, when cooler
is operating.
2-Flashing red light on the control panel means water level in reservoir is low.
3- Rinse the reservoir with fresh water and clean prior to use after a period where the cooler
has not been in operation.
4- Take care when moving the cooler, especially when it is full of water. Pushing too hard will
cause the cooler to overbalance and tip over, which may cause injury and will damage the
cooler.
5- Simplified description of the cooler installation process and the connection modes to supply
main water and electricity.
Open the carton, make sure the cooling machine is in good looking, put water tank, put plug on,
power supply is 220-240V/50Hz including grounding.
No lubricating process for there is a belt.
B-Clean the water reservoir and change the water in the reservoir each month
Make sure the power is off, open the cooling pad, wash pad and water tank in clean water each
month.
CLEAN AND PROTECTION
AIR FILTER
Switch off the power and take away the plug, pull out the handle for the filter. Then you can
use the cleaner to wash it.
Outside the machine clean with the dry-wet cloth
WET CURTAIN
Switch off the power and open the plug. First take out the air filter, then for the wet curtain.
Use the soft brush to wash it.
WATER TANK
Switch off the power and open the back wet curtain. Use the cloth and clean water to wash it.
4
