ONDERHOUD: luchtafvoerfilters
2
3
Cleaning the air output filters and coarse filter
Replacing air output filters
Cleaning the air ducts
1
The air output filters are located at the bottom of
the device. Vacuum the visible dirt off the filters.
This guarantees the air flow. You do not need to
remove the air output filters to do this.
3x
4
1
1
8. Reinstall the air distributor (1),
tilt the lower housing back in
position (2), and tighten the
screws again (3).
9. Put the plug back into the
socket when finished.
1
1
2
2
2
1
3
2.The output filters (3 pieces) are
located at the bottom of the
device, in the middle. These can
be removed by placing a finger
behind the notch.
3. Push 3 new filters into the
holders and then push the plug
back into the socket.
1. First switch the device off by
pulling the plug out of the socket.
First follow steps 1 to 4 of
'replacing the air supply filters'.
5. Turn both blue caps anti-
clockwise and then remove them.
6. Remove dirt from both ducts
with a vacuum cleaner or a soft
cloth (do not use water).
left
right
left
right
7. Push both blue filter caps back
in completely in order to ensure
correct operation and screw them
back into position.
ClimaRad B.V. - Lübeckstraat 25 - 7575 EE - Oldenzaal - NL - [email protected] - www.climarad.co.uk - tel. +31 541 358130
