Press 4 seconds simultaneously
Press for 6 seconds
Function keys
Automatic control. The room ventilation is controlled automatically by your ClimaRad
S-Fan, which ventilates on the basis of CO and RH measurements.
2
AUTO
Pause/Off. Use this function if you (temporarily) do not want to ventilate. After a
period of 4 hours, the ClimaRad S-Fan switches back to the automatic setting. When
the button is pressed for 5 seconds, the unit switches off. In case of emergencies you
can use this function to switch off the device.
Child lock.
P
The child lock is switched on. ress and hold the
three buttons for 4 seconds to switch it off.
No function.
No function.
Malfunction. A malfunction has occurred. Contact your
technician or housing corporation.
Manual: manual ventilation using outside air:
You can set your desired ventilation speed with the + and – keys on the control panel.
After a period of 8 hours, the ClimaRad S-Fan will switch back to the automatic
setting. Use this function for example when you want to lower the temperature in
your bedroom by a few degrees at night in the summer (summer night ventilation).
Messages
Switch off
ClimaRad B.V. - Lübeckstraat 25 - 7575 EE - Oldenzaal - NL - [email protected] - www.climarad.co.uk - tel. +31 541 358130
Dirty Filter. Replace the air filter or contact your technician
or housing corporation. After replacement, press and hold
the + and – buttons for 6 seconds.
Pairing. The ClimaRad S-Fan can be linked to other
ClimaRad products. Press the button briefly and
s
simultaneously.
•
••
• ••
Child lock. The child lock will be activated when you press and hold the three buttons
on the panel for 4 seconds.
•
••
• ••
Press briefly and simultaneously
F u t u r e c o m f o r t t o d a y
