Press 4 seconds simultaneously
Press for 6 seconds
Child lock. This button combination locks your control panel. Press the indicated buttons
simultaneously for 4 seconds. Repeat this action if you want to unlock the control panel.
Function Keys
Automatic adjustment. The ventilation/heating/cooling in the room is controlled
automatically by your ClimaRad ventilation unit, which functions on the basis of CO
2
measurement.
AUTO
Pause. Use this function when you temporarily do not wish to ventilate/heat/cool. After a
period of 4 hours your ClimaRad ventilation unit will switch back to automatic control.
Child lock. The child lock is activated.
Maximum. Your ClimaRad ventilation unit will function in the maximum setting. For
ventilation, this function can be used to expel unpleasant odours such as smoke or cooking
smells. After a period of 4 hours your ClimaRad switches back to automatic control.
Error. A fault has occurred. Please contact your installer or
housing corporation.
Dirty filter. Replace the air filters or contact your installer or
housing corporation After replacing the filters, press the + and -
buttons for 6 seconds.
You can adjust the desired speed for heating or cooling with the + and the – on your
control panel. After a period of 4 hours your ClimaRad ventilation unit switches back to
the automatic control.
Messages
Switch off
ClimaRad B.V. - Lübeckstraat 25 - 7575 EE - Oldenzaal - NL - [email protected] - www.climarad.co.uk - tel. +31 541 358130
Use the AUTO + or AUTO - button combinations to set the desired default temperature of
your room.
AUTO
Ventilation with cooler outside air. Your ClimaRad ventilation unit ventilates with outside
air when it is a minimum of 2 Degrees colder than the air in your room. After a period of 8
hours your ClimaRad switches back to automatic control. You can control the speed with
the + and -. For example, use this function in the summer when you want to lower the
temperature in your warmed room by several Degrees.
/
