background image

Stan dard Fea tures

The fol low ing are stan dard fea tures of this sys tem. Some ve hi cles may re quire op tional parts/wir ing and a few are in com pati ble with some fea tures.

Main te nance

Your Clifford system requires no maintenance except for periodic replacement of the remote control  batteries. This product, like any electrical device in

your vehicle, requires your car battery be in proper working order and fully charged. To ensure proper operation, periodically have your vehicle battery

“load-checked” at any local garage/mechanic. Also make sure the battery cables and connections are  tight and free from corrosion.

2

þ

Lifetime warranty (see terms & conditions)

þ

Two remote controls

n

100’ range (300’ with optional ElectroLoop Antenna)

n

ACG 2™ Anti-CodeGrabbing protection

n

Low remote control battery warning

þ

PlainView 2™ coded valet mode

n

Select your own secret code

þ

Remote controlled valet mode

þ

Starter interrupt

þ

Dual-Zone Piezo Sensor detects both minor impacts and

theft-related tampering

þ

Smart DataPort input

n

For complete optional control of your system via your

Windows PC

n

For smart accessory interfacing

þ

FACT anti-false alarm circuitry

þ

Passive AutoArming if you forget to arm with the remote

control

n

Lock upon AutoArming self-locking

n

Visual AutoArming countdown confirmation

n

Instant AutoArm bypass

þ

High-Output Siren

n

Remote controlled chirp muting

n

Long-term selectable chirp muting

n

Remote siren silencing without disarming if falsely triggered

þ

Power door lock control (some vehicles may require

optional relays)

þ

Ignition-switch controlled AutoLocking/AutoUnlocking

þ

Built-in parking light flasher

þ

Courtesy light(s) turn on when you disarm with the remote

(requires optional relay)

þ

Remote panic feature

n

Smart panic locking/unlocking based on whether the engine is

on/off

þ

Smart optional remote trunk release  prevents falsing

þ

Smart AutoTesting self-diagnostics

n

With specific trigger & sensor  identification

þ

Malfunction AutoBypass

n

Automatic trigger remonitoring if trunk/hood was open when

arming

þ

Smart Prior Intrusion Attempt Alert

n

With specific trigger & sensor  identification

þ

TotalRecall 8-event trigger/sensor memory report

n

With specific trigger & sensor  identification

þ

Remote control code learning

þ

Clear all remotes if ever lost or stolen

þ

LED status indicator

n

Flash indications reveal status

n

Automatic battery saving mode

þ

Multiple vehicle control from the same remote control

þ

Multiple sensor/trigger inputs

þ

User-programmable features

n

SecureAccess coded programming

n

Programmable even while driving

Summary of Contents for Polaris 4










Reviews: