22
© 2016 Directed. All rights reserved.
operations except programming. For Triggers Only, beeps will only be
emitted for Full Trigger messages.
For 1-way companion remote control, OFF will delete all beeps ex-
cept when programming.
To save changes and exit the remote feature programming mode,
press
the
AUX
button once and then
press
and
hold
. The transmit LED
shuts off confirming exit.
Sensor Adjust
To avoid unintended alarm triggers; it is recommenced that an autho-
rized Directed Dealer performs all sensor adjustments.
Remote Pairing Mode
The following instructions step you through the remote pairing opera-
tion of the Responder LE 2-way or 1-way companion remote.
Prepare the vehicle system for pairing
:
1.
Open
at least one of the vehicle’s doors
.
2.
Turn
the key to the ON position.
3. Within five seconds
press
and release the Control Center button
one time.
4. Within five seconds,
press
and
hold
the Control Center button.
The status LED will flash one time and the siren will chirp once to
confirm the system is ready for remote pairing.
5.
Release
the Control Center button and proceed below.
Prepare the remote control for pairing:
6.
Enter
programming by pressing and holding the
AUX
button for
eight seconds to access the Main Menu..
7.
Press
and
hold
the
AUX
AUX
button for one second, three transmit LED
Summary of Contents for 5806X
Page 1: ...M O D E L 5806X O W N E R S G U I D E THE SCIENCE OF SECURITY...
Page 2: ......
Page 54: ......
