background image

15

© 2013 Directed. All rights reserved.

Government Regulations

This device complies with Part 15 of FCC rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and 
(2) This device must accept any interference received, including interference 
that may cause undesirable operation.

This equipment has been tested and found to comply with the limits for a 
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television, 
which can be determined by turning the equipment OFF and ON, the user is 
encouraged to try to correct the interference by one or more of the following 
measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Remote Controls

To satisfy FCC RF exposure compliance requirements, this device should be 
used in hand-held, hand operated configurations only.  The device and its an-
tenna must maintain a separation distance of 20 cm or more from the person’s 
body, except for the hand and wrists, to satisfy RF exposure compliance.  This 
device is designed to be used in a person’s hands and its operating configu-
rations do not support normal transmissions while it is carried in pockets or 
holsters next to a person’s body.

Summary of Contents for 5706X


























Reviews: