26
© 2014 Directed. All rights reserved.
26
Alarm Features
Normal Arm Protection
Status LED:
The Control Center Status LED flashes as a visual indicator
that your vehicle’s security system is active.
Starter Kill:
The Failsafe starter kill relay prevents the engine from
starting
Note
May require additional parts and installation
Sensor triggers:
The shock sensor can distinguish minor impacts from
major impacts to the vehicle exterior. Minor impacts causes the system
to emit a Warn-away output by chirping the siren and flashing the
parking lights for three seconds. Major impacts caused for example
by a forcible entry attempt, results in a Full Trigger output. The siren
sounds and the parking lights flash for 30 seconds or longer. Both
Warn-away and Full Triggers send a message to the remote control.
Point of entry triggers:
Opening the hood or trunk causes a Full Trig-
ger output, while opening a Door or turning on the Ignition causes
the the siren to chirp three seconds before beginning the Full Trigger
output. This three second delay allows time to disarm and silence the
siren in case of accidental trigger. The Full Trigger message is still sent
to the remote.
Sensor Silent Arm protection
Sensor Warn-away and Sensor Full Trigger activations only send mes-
sages to the remote, while the parking light flash and siren outputs are
defeated. Point of entry triggers will activate the parking light flash,
siren, and send messages normally.
Summary of Contents for 3706X
Page 3: ......
