7
AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
Getting Started (Cont.)
Fig. 1
Fig. 2
Assembly
The stand of this tower fan must be
attached to the fan base before use.
Please follow the assembly instructions
below. Ensure all parts are properly
assembled before using the appliance.
• STEP 1: Place the product flat on
the floor or desktop、. On the base
of the tower fan remove the base
locking collar by unscrewing it in an
anticlockwise direction (Fig. 1).
• STEP 2: Take the two base shells and
run the mains plug and power supply
cord of the tower fan through the
openings in each (Fig. 2).
• STEP 3: Fit together the two base
shells to form the base and then insert
the four base screws, tightening them
in a clockwise direction to secure.
• STEP 4: Attach the base onto the
bottom end of the tower fan so
that the locking tabs align with the
corresponding slots. Twist the base
locking collar in a clockwise direction
to secure it into position. Insert the
power cord into the cable slot.
• After installation, place the tower fan
in vertical position for operation.
WARNING!
Never use the fan until it is properly assembled and affixed securely on the stand.
The fan must only be operated standing upright.
