How to use 2.4G Card?
1
)
Start the 2.4G card
--- 2.4G card is off usually when you receive it in case power
consumption since there is battery inside. Battery will be used
for about 2 years once it is on.
--- Before installing it on the wall, we need start it --- using little
wrench we provided together with the card to insert the hole,
you will feel to touch a rubber button inside and once it is on,
you will feel there is a little “click” feeling...
--- Once the red light is blinking, and later it will be keep blinking
every 5 seconds, that means the card is on.
--- The hole is just like an on/off button.
--- Please note: DO NOT use too sharp thing to poke the hole
heavily to break it.
Please check below picture