AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
5
5
Before first use
• Unpacking: This product has been packaged to protect it against
transportation damage. Unpack the fan and keep the original
packaging carton and materials in a safe place. It will help prevent
any damage if the product needs to be transported in the future, and
you can use it to store the product when it is not in use. In the event
that the packaging is to be disposed of, please recycle all packaging
materials where possible.
• Safe packaging disposal: Plastic wrapping can be a suffocation hazard
for babies and young children, so ensure all packaging materials are
out of their reach and disposed of safely.
• Inspection: Unwind the USB cable to its full length and inspect it for
damage. Do not use the product if the USB cable or the fan has been
damaged or is not working properly. In case of damage, contact our
after sales support centre.
• Documentation: Make sure you have read and understood all
instructions and warnings in this manual. Refer to the illustration
to familiarise yourself with the product and identify all parts. Pay
particular attention to the safety instructions on the previous pages.
• Assembly: Your new fan has been fully assembled at the factory. No
assembly is necessary.
Charging the fan
This product contains a built-in lithium ion battery, which must be
charged before use.
• Connect the supplied USB cable to the micro USB port at the back of
the fan handle and the USB connector end to a powered USB port (on
a computer, laptop or other powered USB port).
• During charging, the indicator light will illuminate red.
• For your convenience, you can place the fan in the stand during
charging.
• When charging has finished, disconnect the USB cable.
•
CAUTION:
If strong heat occurs during charging, stop charging or
using the product and contact our after sales support centre for advice.
NOTE: If you use your computer for charging the fan, make sure to con-
nect the computer to the power supply during charging to avoid battery
power drain.
Instructions
