CLICK!
5 Take new dial and press down to close dial.
8 Snap dial fully into bayonet.
6 On back of new dial, turn until two arrows sync
with each other.
9 Cycle system to test function. Push to engage. Twist to
tighten. Pull to release.
7 Feed right lace through through right reel exit. Tie off with
single overhand knot.
4mm - 7mm
Up to 20cm
Knot and tail should
not be visible
1
1
3
2
2
4
Allow up to 20 cm of slack lace per lace port. Cut to size.
Pull knots into port. Repeat for opposite side of dial.
CLICK!
