2
INSTALLATION AND OPERATING INSTRUCTIONS
OPERATION CONDITIONS AND SAFETY PRECAUTIONS
Read all instructions carefully.
• All components need to be installed in accordance with the user
manual instructions for correct performance of unit.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that they do not play
with the appliance.
• A power outlet is required to operate the appliance. Electrical
supply required 220~240V/50Hz.
• Ensure unit is properly grounded.
• To protect against fire, electric shock and personal injury, do
not spray water onto the unit, do not immerse cord, plugs, or
appliance in water or other liquid. Do not push any objects in the
unit air inlet and air outlet exhaust grilles.
• Unplug from outlet when not in use and before cleaning. Never
unplug unit with wet hands.
• Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or has been damaged in any
manner.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• The use of accessory attachments not recommended by the
appliance manufacturer may result in fire, electric shock or
personal injury.
• Ventilation – The appliance air vents and exhaust grilles must
not be obstructed at any time. Air flow is required for the unit to
operate effectively. Place unit in a flat well-ventilated location at
least 30 cm from wall or other appliances.
• Do not use outdoors.
• Do not use in wet environments e.g. Bathrooms or Showers.
• Do not let cord hang over edge of table or counter, or touch hot
surfaces.
• Do not use appliance for other than intended use.
• This appliance should always be used in conjunction with a
safety switch.
• Do not place the unit near an oven, heater, radiator, direct
sunlight or any other heat source.
• Do not use unit near flammables or fire.
• Ensure unit is on a stable and even flat surface to prevent unit
from falling or tipping over and to reduce possible excessive
vibration and noise.
