17
simultaneously. When using channel 1 1 select the channel number is 020-029
and ID Address=02, the controller can control the second light individually.
When using channel 11 select the channel number is 000-010 and ID
Address=00, all the lights are in common use at the same DMX address.
Master/Slave Control Mode
1 Setting master machine
Acc
ess control panel function by pressing MODE until
is displayed.
Press ENTER, select
or
by pressing UP/DOWN buttons.
Press ENTER, and then press MODE to exit.
You can choose
pre-set programs, the range is
o1--10 .
Or you can choose
custom programs, the range is
o1--10
.
2 Setting slave machine
Access contro
l panel function by pressing MODE until
is displayed.
Press ENTER, press UP/DOWN buttons until the
is displayed.
Press MODE return to MENU
3 Usage of Master/Slave
When two
or more fixtures connected, you can set up the first machine as the
Master and the followed fixtures as Slaves. The Master can choose pre-set programs ...
or
, all the slaves will follow the Master's operation synchronously.
