WWW
.
CLF
-
LIGHTING
.
COM
5
.
0
Introduction
Warning! Read “Safety Information” on page 2 before installing, powering, operating or servicing the fixture.
Before applying power to the fixture:
l
Check that the local AC mains power source is within the fixture’s power voltage and frequency ranges.
l
See “Power cables and power plug” on page 6. Install a
power input connector on a suitable
power cable.
®
PowerCON TRUE 1
Using for the first time
AC power
Warning! Read “Safety Information” starting on page 2 before connecting the fixtures to AC mains power.
Warning! For protection from electric shock, the fixture must be grounded (earthed). The power
distributioncircuit must be equipped with a fuse or circuit breaker and ground-fault (earth-fault) protection.
Warning! Socket outlets or external power switches used to supply the fixture with power must be
located near the fixture and easily accessible so that the fixtures can easily be disconnected from power.
Important! Do not insert or remove live
connectors to apply or cut power, as this
may cause arcing at the terminals that will damage the connectors.
Important! Do not use an external dimming system to supply power to the fixture, as this may cause
damage to the fixture that is not covered by the product warranty.
power voltage
Warning! Check that the voltage range specified on the fixtures serial number label matches the local
AC mains power voltage before applying power to the fixture.
The fixtures accepts AC mains power at 100-240 V nominal, 50/60 Hz. Do not apply AC mains power to the
fixture at any other voltage than specified.
®
PowerCON TRUE 1
Superior LED wash
4 Individually controllable segments
¢
¢
Designed for multiple applications
¢
Deep and saturated colors
¢
Flicker free operation
¢
Solid housing
Wireless DMX
Adjustable beam angle several options available (for example 36° and 54°)
¢