Cleyver HW25, User Manual

Page: 4 / 8

4 5
SET UP
1 CONNECT TO DESK PHONE
Option 1
Option 2
Or
Or
Desk Phone without Headset Port:
This desk phone does not have a dedicated
headset port.
1.On the desk phone, unplug the handset
cable from the phone body.
2.Connect the handset cable to the port
marked on the base.
3. Plug the supplied telephone cable into
the port marked on the base.
4. Connect the telephone cable into
the handset port on the desk phone.
Desk Phone with the remote Handset Lifter:
The Handset Lifter manually lifts the desk phone handset
to make or answer a call. For mounting
instructions refer to documentation
supplied with the Handset Lifter.
1.On the desk phone, unplug the handset
cable from the phone body.
2.Connect the handset cable to the port
marked on the base.
3.Plug the supplied telephone cable into
the port marked on the base.
4. Connect the telephone cable into the
handset port on the desk phone.
5.Connect the Handset Lifter cable into the port
marked AUX on the base.
Option 3
Or
Desk Phone with Headset Port:
This type of desk phone has a dedicated
headset port(usually at the back of the
phone). These phones typically have a
button on the front panel for switching
between handset and headset.
1. Plug the supplied telephone cable into
the port marked on the base.
2.Connect the telephone cable to the
headset port on the desk phone.
Option 4 Or
Desk Phone with EHS:
A EHS adapter enables an incoming
call to be answered or ended by the headset
multi-function button.
Contact your local dealer to purchase a
EHS adapter for your specific desk
phone.
1. Connect the EHS adapter as shown in
adapter documentation supplied with the
EHS. On some phones the telephone
cable will also need to be connected.
2. Call your connected desk phone using
another phone to actives the EHS
adapter. Wait 10 seconds before
answering the phone.
Pls refer to the
EHS user guide