Clevo W550SU1, Service Manual

Page: 36 / 104

Disassembly
2 - 12 Removing and Installing a Processor
2.Disassembly
Removing and Installing a Processor
Processor Removal Procedure
1. Turn off the computer, turn it over, remove the battery ( page 2 - 5 ) and the component bay cover ( page 2 - 8 ).
2. The CPU heat sink will be visible at point ( Figure 8a ).
3. Carefully disconnect the fan cable ,and then remove the screws - ( Figure 8b ) .
4. Lift the fan out of the bay ( Figure 8c
)
.
5. Loosen the CPU heat sink screws in the order , & (the reverse order as indicated on the label Figure 8d .
A
B C E
6 F
3 2 1
a.
b.
1
2
3
A
F
D
B
C
E
c.
d.

F. Fan
• 6 Screws
Figure 8
Processor Removal
a. Locate the CPU heat
sink.
b. Disconnect the cable
and remove the screws.
c. Remove the fan.
d. Remove the screws.