Clevo W253CZQ, Service Manual

Page: 37 / 99

Disassembly
Removing the Keyboard 2 - 13
2.Disassembly
Removing the Keyboard
Figure 9
Keyboard Removal
a. Remove screws from the
bottom of the computer.
Press at points
to un-
snap the LED cover
module.
b. Remove the LED cover
module and screws
from the keyboard.
c. Carefully lift the key-
board up and disconnect
the keyboard ribbon ca-
ble from the locking col-
lar socket.
d. Remove the keyboard.
3
1. Turn off the computer, and remove the battery ( page 2 - 5 ).
2. Remove screws
-
from the bottom of the computer. Press at points to unsnap the LED cover module
(you may need to use the Eject Pin Tool to do this ( Figure 9a ).
3. Remove the LED cover module and screws - from the keyboard ( Figure 9b ).
4. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable . Disconnect the keyboard
ribbon cable from the locking collar socket ( Figure 9c )
5. Carefully lift up the keyboard ( Figure 9d ) off the computer.
1 2 3
4
4
5 9
10
10 11
12

Re-Inserting the
Keyboard
When re-inserting the
keyboard firstly align the
four keyboard tabs at the
bottom ( Figure 9c ) at the
bottom of the keyboard
with the slots in the case.
a.
Keyboard Tabs
1
3
2
3
5
c.
b. d.
6
7
12
8
9
10
4
11

4. LED Cover Module
12. Keyboard
• 7 Screws