Clevo W240BU, Service Manual

Page: 32 / 97

Disassembly
2 - 8 Removing the Optical (CD/DVD) Device
2.Disassembly
Removing the Optical (CD/DVD) Device
1. Turn off the computer, and remove the battery ( page 2 - 5 ).
2. Locate the RAM & CPU bay cover , and remove screws - .
3. Carefully ( a fan and cable are attached to the under side of the cover ) lift up the bay cover.
4. Carefully disconnect the fan cable , and remove the cover
.
5. Remove the screw at point , and use a screwdriver to carefully push out the optical device at point .
6. Insert the new device and carefully slide it into the computer (the device only fits one way. DO NOT FORCE IT; The
screw holes should line up).
7. Restart the computer to allow it to automatically detect the new device.
Figure 4
Optical Device
Removal
a. Remove the screws.
b. Remove the cover.
c. Remove the screw and
push the optical device
out off the computer at
point 8.
1
2 5
6 1
7 9 8

1. Component Bay Cover
9. Optical Device
• 5 Screws
3
c.
9
1
4
6
a.
b.
2
5
7
8