Clevo S3100, Service Manual

Page: 35 / 98

Disassembly
Removing the Wireless LAN Module 2 - 11
2.Disassembly
Removing the Wireless LAN Module
1. Turn
off
the computer, remove the battery ( page 2 - 5 ) and keyboard ( page 2 - 8 ).
2. The Wireless LAN module will be visible at point ( Figure 7a
)
on the mainboard.
3. Carefully disconnect cables - , then remove screw from the WLAN module ( Figure 7b ) .
4. The Wireless LAN module ( Figure 7c ) will pop-up.
5. Lift the Wireless LAN module ( Figure 7d ) up and off the computer.
Figure 7
Wireless LAN
Module Removal
a. The WLAN module will
be visible at point
.
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
pop up.
d. Lift the WLAN module
out.
Note: Make sure you
reconnect the antenna
cable to ‘’1’’ +
‘’2’’socket (
Figure
7b ).
1
1
2
3 4
5
5
5
5
2
a. c.
3
4
5
1
b.
d.
Note:
Make sure that the WLAN cable is under the
bracket.
5

5. WLAN Module
• 1 Screw