Clevo PB70DDS, Service Manual

Page: 35 / 132

Disassembly
Removing the M.2 SSD Module 2 - 11
2.Disassembly
Removing the M.2 SSD Module
M.2 SSD-1 Removal Procedure
1. Turn off the computer, remove the battery ( page 2 - 5 ), keyboard ( page 2 - 6 ) and bottom case ( page 2 - 8 ).
2. The M.2 SSD module will be visible at point on the mainboard ( Figure 7a ).
3. Remove the screw ( Figure 7b ).
4. The M.2 SSD module ( Figure 7c ) will pop-up, and you can remove it from the computer.
5. Reverse the process to install a new module (do not forget to replace the screws and thermal pad).
1
2
3
b.
c. a.
2
3
1
3
3
2
1
PCIE SSD
SATA/PCIE SSD

3.M2 SSD Module
• 1 Screw
Figure 7
M.2 SSD-1 Module
Removal
a. Locate the M.2 SSD.
b. Remove the screw.
c. The M.2 SSD module
will pop up.