Clevo P570WM, Service Manual, Page: 20 / 24

Disassembly
Removing the Keyboard 2 - 11
2.Disassembly
6. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable.
7. Disconnect the keyboard ribbon cable from the locking collar socket , and the keyboard LED cable from
its locking collar socket .
8. Remove the keyboard , and screws - from the keyboard shielding plate.
9. Reverse the process to replace the keyboard (make sure to reconnect the keyboard cable).
10. Snap the LED cover module down at the top fo the module at point & .
11. Push the LED cover module down on the left side at point , and then slide the module to the right (as illustrated)
and snap down to secure it in place.
12. Replace the screws on the bottom of the computer.
11 12 13
14
15 16 18
11
13
12
16
17
18
14
11
13
12
e.
15
f.
Keyboard Tabs

Re-Inserting the Keyboard
When re-inserting the keyboard
firstly align the
five keyboard
tabs at the bottom ( Figure 7f ) at
the bottom of the keyboard with
the slots in the case.
15
Figure 7
Keyboard Removal
(cont’d.)
e. Disconnect the cable
from the locking collar.
f. Remove the keyboard.
g. Snap down the LED cov-
er.
h. Push the LED cover on
the left side at point
and the slide toward the
right to secure it in place. 22

15. Keyboard
19. LED cover module
• 3 Screws
19 20 21
22
g.
20
21
22
h.
19