Clevo NB55TK1, User Manual

Page: 131 / 304

BIOS Utilities
Advanced Menu 5 - 9
5
FlexiCharger (Advanced Menu > Advanced Chipset Control)
The sub-menu here allows you to enable/disable the FlexiCharger . The FlexiCharg-
er may be set to automatically start charging your battery when the battery reaches
a certain capacity level (e.g. you could start the battery charge level at 40%).
See the sidebar warning for information on running the FlexiCharger for an ex-
tended period as this is not recommended
.
Software Guard Extensions (Advanced Menu > Advanced Chipset Control)
Intel provides SGX, which is a set of instructions allowing user-level code a degree
of security, and privacy, from the operating system. This is
Software Controlled by
default, so install the driver (see “Intel® Software Guard Extensions Driver” on
page 6 - 39 ) to support this, and it can also be disabled or enabled here if required.

FlexiCharger
Warning
If you leave the FlexiCh-
arger continuously "
En-
abled ” for a period of
three months or more,
the battery meter's read-
ing accuracy will deteri-
orate.
To reset this, set the
FlexiCharger to "
Dis-
abled ", and then allow
the battery to completely
discharge (see
“Battery
FAQ” on page 4 - 21 )
before enabling the
function again.
Figure 5 - 4
Advanced Chipset
Control >
FlexiCharger