Clevo N750BU, Service Manual, Page: 41 / 96

Disassembly
Removing and Installing the M.2 SSD Module 2 - 17
2.Disassembly
M.2 SSD Installation Procedure
1. Place the thermal pad on the bottom case as shown ( Figure 11a ).
2. Insert the module in the computer
(
Figure 11b
)
.
3. Tighten the screw to secure it in place ( Figure 11c ).
1
Figure 11
M.2 SSD Module
Installation
a. Place the thermal pad.
b. Insert the module.
c. Tighten the screw.
2
3
a.
3
2
b.
c.
1

Thermal Pad
Be sure to place the thermal pad’s adhesive side down onto the
mainboard surface.
The thermal pad‘s thickness differ for different M.2 SSD module:
•
For module with chip, use 2.5mm thick thermal pad.
• For module without chip, use 3.5mm thick thermal pad.

1. Thermal Pad
2. M.2 SSD Module
• 1 Screw