Clevo N150SC, Service Manual

Page: 22 / 24

Disassembly
2 - 14 Removing the Wireless LAN Module
2.Disassembly
Removing the Wireless LAN Module
1. Turn off the computer, remove the battery ( page 2 - 5 ), keyboard ( page 2 - 11 ) and bottom case ( page 2 - 6 ).
2. The Wireless LAN module will be visible at point on the mainboard ( Figure 10a ).
3. Carefully disconnect the cables & , and then remove the screw ( Figure 10b )
4. The Wireless LAN module ( Figure 10c ) will pop-up, and you can remove it from the computer.
1
2 3 4
5
b.
c.
a.
2
3
5
1
5
4

5.Wireless LAN Module
• 1 Screw
Figure 10
Wireless LAN
Module Removal
a. Locate the WLAN.
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
pop up.
Note: Make sure you
reconnect the antenna
cable to the “1 + 2”
socket (
Figure 10b ).