Clevo D400S, Service Manual

Page: 42 / 113

Disassembly
2 - 22 Removing the TouchPad and Click Board
2.Disassembly
Removing the TouchPad and Click Board
1. Turn off the computer, remove the battery ( page 2 - 8 ), hard disk ( page 2 - 9 ), RAM ( page 2 - 10 ), CD Device ( page
2 - 12
), Bluetooth module (
page 2 - 14
), Wireless LAN module (
page 2 - 15
), CPU (
page 2 - 16
), keyboard (
page 2 -
18
), keyboard shielding plate (
page 2 - 19
) and the top case and LCD (
page 2 - 20
).
2. Remove screws - ( Figure 15a ) from the touchpad and click board assembly, and lift the assembly off the top
case.
3. Disconnect cable ( Figure 15c ) and remove screws - ( Figure 15d ).
4. Separate the touchpad and click board ( Figure 15e ).
Figure 15
TouchPad and Click
Board Removal
a. Remove the screws.
b. Separate the assembly
from the top case.
c. Disconnect the cable.
d. Remove the screws.
e. Separate the touchpad
and click board.
!
12. Touch Pad
13. Click Board
• 10 Screws
1 8
9 10 11
12
a.
b.
8
7
1
2
5
4
3
6
9
13
c.
d.
e.
10
11
12
13