Clevo 5600D, Service Manual

Page: 36 / 129

Disassembly
Removing the Keyboard 2 - 11
2.Disassembly
Removing the Keyboard
1. Turn OFF the computer.
2. Press the two keyboard latches at the top of the keyboard to elevate the keyboard from its normal position as in Fig-
ure 2 - 5a (you may need to use a small screwdriver to do this).
3. Carefully lift the keyboard up and out, being careful not to bend the keyboard ribbon cable ( Figure 2 - 5b ) .
4. Disconnect the keyboard ribbon cable from the locking collar socket ( Figure 2 - 5b ).
Figure 2 - 5
Keyboard
Removal
Sequence
a. Press the two latch-
es to release the
keyboard.
b. Lift the keyboard out
and disconnect the
cable from the lock-
ing collar.
3
3
a.
Keyboard Tabs
1 2
3
c.
b.
4
Re-Inserting the Key-
board
When re-inserting the
keyboard firstly align
the
five keyboard tabs
( Figure 2 - 5 c ) at the
bottom of the keyboard
with the slots in the
case.
3. Ribbon cable
4. Keyboard