manualshive.com logo in svg

Clevo 3X00C, User Manual

Share
Download
Clevo 3X00C User Manual Download Page 1

Table of Contents

Chapter 1:  Introduction .............................................................. 1 - 1

Safety Tips ............................................................................... 1 - 1
Operating Environment ............................................................. 1 - 6

Ergonomics .......................................................................... 1 - 6
Lighting ................................................................................ 1 - 7

Checking your items: ................................................................. 1 - 8

Chapter 2:  A quick tour of your new computer ......................... 2 - 1

Right Side view ......................................................................... 2 - 1
Rear View ................................................................................ 2 - 3
Left Side View .......................................................................... 2 - 5
Underside ................................................................................. 2 - 6
Opening the LCD display .......................................................... 2 - 8
Top view with display open ....................................................... 2 - 9

Chapter 3:  Using your new computer ........................................ 3 - 1

The power sources ................................................................... 3 - 1
Battery pack ............................................................................. 3 - 2

Removing the battery pack ................................................... 3 - 2
Inserting the battery pack ..................................................... 3 - 3
Recharging by AC Power .................................................... 3 - 3
Proper Handling of the Battery Pack .................................... 3 - 3

Turning on your notebook computer .......................................... 3 - 4
LED indicators ......................................................................... 3 - 4

LED Power indicators .......................................................... 3 - 5
LED Status indicators .......................................................... 3 - 6

The Hard Disk Drive (HDD) ..................................................... 3 - 7

About the HDD ................................................................... 3 - 7
Removing the HDD .............................................................. 3 - 7
Inserting the HDD ................................................................ 3 - 7

The Floppy Disk Drive (FDD) .................................................. 3 - 8

About the FDD .................................................................... 3 - 8
Using the FDD ..................................................................... 3 - 8

Summary of Contents for 3X00C






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands