Clever CL-IV, Setup And Operation

Page: 3 / 4

6.3 GSM control via SMS
2
Set “ 03000000# ” system default no remind. The setting is “ 03+year+month+date
+# ” , each is 2 bit. When set SIM card successfully, It gives remind during 08 00---21
00 each day on the 10days before or after the preset date .. This function is to remind
the user check SIM charge, in order to make sure GSM can work normally . For example:
set 2010-12-12 as expiration date, setting as below:
Enter
LCD disply
Note: 30 is signal strength, the Max. 31, only if
the signal strength above 16, then it can send
alarm information to CMS steadily via GSM.
1 . 6 GSM alarm receiving
When alarm occurs, GSM will call the preset voice number, it will voice
prompt “ system is alarm, please process the alarm, press 1 to cancel the alarm,
press 2 to check alarm zone, press 3 to activate the hoot, press 4 to disabled the
hoot, press 5 to disarm, press 6 to arm, press 7 to standby, press 0 to hang up ” .if
receiving alarm, please press 2 to check in advance, voice prompt “ XX zone alarm ” ,
first make sure it is false alarm then you can cancel the alarm. Don't error
operation.
Voice prompt “ operation successfully ” ,or else need to re-operate, if you want
to hang up, please press 0, then hang up.
6.2 GSM remote operation
User can remote control the system by phone call, for example arm/disarm
system, and status checking. Y ou can call SIM card number , then panel will off
hook the phone then enter the password, the default password is 1234, as per the
revised user password when you operate, voice prompt “ press 1 to disarm, press 2
to arm, press 3 to standby , press 0 to hang up ” . When operate successfully, voice
prompt “o peration successfully ” .
:
Arm command:
Password:1234
System arm
Disarm command:
Password:1234
System disarm
[System pa[ 0 ]
[System pa[ 0 ]
Press “ , ” to exit the settings.