Date and Time
Connect the 12v DC Power to the terminal (Positive V+ and
Negative GD). Ensure the correct polarity is observed.
Once powered the LCD screen will illuminate showing the Home
Screen, this shows the Day, Date and Time. This will need to be
reset to represent your current local time and date settings.
Press SET/SAVE the display will show >SET DATE & TIME, press
ENTER
Using the + and – buttons scroll to the desired day, press ENTER to jump to the Date
settings.
Please Note:
The date is shown in the
Year/Month/Day format; use the + and
– buttons to change the field, pressing
ENTER after each is set.
Follow the same procedure for adjustment of the Time.
Once the Date and Time are configured press SET/SAVE and the message CHANGES
SAVED will display for a short time before reverting to the Home Screen.
If at any time of the above process you wish to cancel the programming, press ABORT
which will return the unit back to its last SET/SAVE format.
Summary of Contents for TU-8A
Page 1: ...TU 8A 8 Channel Digital Timer Unit Programming Guide...
Page 8: ......
