Specifications
General:
Channels
Four, individually configurable
Bandwidth
100Hz to 20KHz (-3dB)
Crosstalk
>60dB
Signal to Noise Ratio
>60dB
Cable Spec
Screened Cat5e cable (can use UTP but one pair required for ground
meaning only three channels would be available)
Cable length
1000m maximum
Cat5 terminators
Screw terminals
Protected against short circuit on Cat5 cable to ground
07
Specifications:
INPUT Module:
Power
Over Cat5 cable
Ground
Over Cat5 cable screen (or spare pair)
Inputs x 4
Balanced XLR female
MIC/LINE in
Selectable by jumper
Phantom power
15v jumper selectable
MIC impedance
600R
MIC level input
10mV RMS
LINE impedance
50K
LINE input level
700mV RMS (1.5v RMS max)
Cat5 termination
Screw terminals
Dimensions
145(W) x 85(H) x 35(D)mm
OUTPUT Module:
Power requirements
24v DC @ 100mA
Outputs x 4
Balanced XLR male
MIC/LINE out
Selectable by jumper
MIC out impedance
600R
MIC level output
20mV RMS (into 600R)
LINE out impedance
20K
LINE level output
700mV RMS (into 20K)
Dimensions
145(W) x 85(H) x 35(D)mm
