Accessories Introduction
03
Function of the “E-Wand”
When the silver button on the E-Wand body is pressed,
an infrared signal is emitted, which is detected by the IR
Sensor integrated within the Projector (when the button is
pressed and an IR signal emitted, the LED on the E-Wand
lights red).
Before using the Wand.
Screw the Telescopic Rod into the Wand body firmly.
How to use:
1) Extend the telescopic E-Wand to the required length.
2) Position the tip of the E-Wand on the ‘screen’.
3) Push the E-Wand button to click the target as in ‘mouse’
function, or click and hold the button to draw or write in
‘pen’ function.
Back
Front
LED Lamp
Button: Mouse Left Key
Function of the “E-Pen”
How to use:
When the tip of the E-Pen is pressed (such as onto the
‘screen’ area), an infrared signal is emitted, which is
detected by the IR sensor integrated within the Pro-Vue
Projector.
1) Position the tip of the E-Pen on the ‘screen’
2) Press the E-Pen on the screen to click the target as in
‘mouse’ function; press and drag to draw or write in ‘pen’
function.
PLEASE NOTE: As the sensor is located in the
tip of the E-Pen, it is very important to ensure the
E-Pen is switched off when not in use to avoid
unnecessary battery consumption.
Pen tip with touch sensor
Power switch
Back
Front
Summary of Contents for Pro-Vue Interactive
Page 1: ...User Guide...
