6
bottom zone.
•
You need to select the set zone by touching the mark
before touching the mark
or
to set the
desired temperature. The display window with digital flashing indicates the zone ready for temperature
setting.
•
The first touch on mark
or
will recall the previous set temperature displayed in the digital window
•
Touch the mark
to increase the set temperature by 1ºC (or by 1ºF). On the contrary, touch the mark
to decrease the set temperature by 1ºC (or by 1ºF).
•
The digital will change to display the real temperature of the inside cabinet after 10 seconds without being
touched.
Note: For the first time to use the appliance or to restart the appliance after having been shut off for a long
time, you may find a few degrees variance between the set temperature and the displayed temperature. It is
normal and everything of the appliance will be in the order after a few hours running.
SELECTING FAHRENHEIT (ºF) or CELSIUS (ºC) DISPLAY
For Single Zone
Touch the marks
with 2 fingers at the same time and hold for 5 seconds, you can interchange the
Fahrenheit and Celsius display.
For Dual Zone
Directly touch the mark
, you can interchange the Fahrenheit and Celsius display for both zones at the
same time.
CARE AND MAINTENANCE
CLEANING THE WINE COOLER
• Turn off the power, unplug the appliance, and remove all items including shelves.
• Wipe the inside surfaces with a sponge and baking soda solution. The solution should be about 2
tablespoons of baking soda to 1 litre of warm water.
• Wash the shelves with a mild detergent solution. Allow the wooden shelves to dry before placing them back
into the wine cooler.
• Remove excess water from the sponge or cloth when cleaning the controls, or any other electrical display
areas.
• Wipe the outside cabinet with warm water and a mild liquid detergent. Wipe dry with a clean soft cloth.
• Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless steel with
steel particles and rusting may occur.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your appliance
if you minimize the number of times the door is opened. If the power is going to be off for a longer period of
time, you need to take the proper steps to protect your contents.
MOVING THE WINE COOLER
• Remove all items.
• Securely tape down all loose items (shelves) inside your appliance.
• Turn the adjustable legs up to the base to avoid damage.
• Tape the door shut.
• Ensure the appliance stays secure in the upright position during transportation. Also protect the outside of
appliance with a blanket, or similar item.
Summary of Contents for GC46BC
Page 12: ...10...
