www.cleveracoustics.co.uk
ZM 107 Audio Mixer
User Manual
6
Operating instructions
6. Echo control (CH3-5):
The ECHO effect control can be activated for input channels CH3-5.
The range goes from 0 (off) to 10 (max.).
7. Headphone level control:
Output volume for the headphone output. Turn the knob clockwise to increase the volume of the
headphone output. Care should be taken to adjust the level in small increments to avoid sudden
increases in the volume. Caution: Listening to music volumes within headphones
8. Headphone output:
6.35mm (1/4”) stereo output jack for headphones.
9. MONO output level control:
Output level volume control of the MONO OUT. To avoid unexpected noise or bursts of audio, the level
should be set to minimum when the power is switched on or off.
10. STEREO output level control:
Output level volume control of the STEREO OUT. To avoid unexpected noise or bursts of audio, the level
should be set to minimum when the power is switched on or off.
11. L/R LED Output Meter
The LED meter indicates the level of output signal, this will illuminate green under normal conditions or
amber when the signal is high. Also a clipping indicator will indicate red when the output is too high.
12. Power switch & LED indicator:
This switch controls to power on/off the unit. When the unit is switched on, the LED will light up.
Before powering the ZM 107 on or off, it is best practice to reduce the input and output levels to
their minimum to avoid any unwanted or sudden bursts of noise from the outputs.
13. AC mains power input with fuse:
This connector is meant for the connection of the supplied power cord. Please check the supply voltage
accepted by the unit (100-240V AC~50/60Hz) and the voltage available from AC sockets before
connecting the unit to the mains power. This product falls under CLASS 1 and must have a protective
earth connection at all times.
14. STEREO outputs:
Balanced XLR outputs for connection to amplification sources.
15. MONO output:
Balanced XLR outputs for connection to amplification sources.
16. REC output:
Unbalanced RCA stereo output. To be used with external processing devices or power amplifiers. There
is no EQ and level adjustment on this output.
17. AUX 1-2 inputs:
Unbalanced RCA stereo inputs. To be used with sound sources like CD, DVD, MP3, etc. The front and the
