Clever Acoustics PM Z6, User Manual

Page: 6 / 12

www.cleveracoustics.co.uk PM Z6 Paging Microphone User Manual
6
Operating instructions
9. 24V DC Power Input
The paging console may be powered directly from the amplifier when the cable length is 40m or less
and high quality CAT5E cable is used. Should the cable length be over 40m, the supplied external mains
adaptor may be used to power the paging console.
10. RS-485 Interface
The paging console operates via RS-485 control protocol over standard CAT5E cabling. Both the
amplifier and paging microphones feature two RJ45 sockets to allow for up to 6 microphones to be used
per system. Details of how to configure a multiple microphone system are included on the following
pages in this user manual.
11. Chime Gain Control
The chime function features variable gain to allow the user to set their desired output level. Turn the
level control anti clockwise to the lowest setting, or turn clockwise to adjust to the highest setting.
Adjustments should be made gradually to avoid any sudden changes to the audio output. If the audio
source appears to sound distorted, a reduction in gain may be required.
12. Microphone Gain Control
The microphone features variable gain to allow the user to set their desired output level. Turn the
level control anti clockwise to the lowest setting, or turn clockwise to adjust to the highest setting.
Adjustments should be made gradually to avoid any sudden changes to the audio output and avoid any
potential feedback. If the audio source appears to sound distorted or there is audio feedback (howl
around), a reduction in gain may be required.
13. Master Volume Control
The paging console features a master volume control to allow the user to set their desired, overall
output level for the microphone and chime functions. Turn the level control anti clockwise to the lowest
setting, or turn clockwise to adjust to the highest setting. Adjustments should be made gradually to
avoid any sudden changes to the audio output and avoid any potential feedback. If the audio source
appears to sound distorted or there is audio feedback (howl around), a reduction in gain may be
required.
14. Chime Tone Selector
The chime function may be set to either 2 tone or 4 tone chime. The tone must be preset during initial
setup before powering on the paging console.