Speaker connections:
WARNING!
Be sure to attache the supplied terminal cover attached after con-
nection. Because high voltage is applied to the speaker terminals,
car should be taken never touch these terminals to avoid
electric shock.
All speaker connections should be made using bare wire or suitable
insulated crimp terminals. Please ensure no loose strands are present
as these may short across terminals causing damage to the amplifier
Notes:
• Both the 4 - 16Ω, 70V and 100V terminals cannot be used at the same time.
• Impedances indicated in the figures represent the total speaker system (load) impedances.
Loads presented to the amplifier must be equal to or greater than listed above. Speaker
impedances must be measured using a true impedance meter, do not standard multimeters.
Total impedance
41Ω (SL 120)
20Ω (SL 240)
14Ω (SL 350)
Total impedance
83Ω (SL 120)
42Ω (SL 240)
28.6Ω (SL 350)
9
